Low-density polyethylene

From Wikipedia, the free encyclopedia

(Redirected from Low density polyethylene)

This article does not cite any references or sources.
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. (February 2008)

LDPE has SPI

resin ID code 4

Low-density polyethylene (LDPE) is a thermoplastic made from oil. It was the first grade of polyethylene, produced in 1933 by Imperial Chemical Industries (ICI) using a high pressure process via free radical polymerisation [1]. Its manufacture employs the same method today. LDPE is commonly recycled, and has the number "4" as its recycling symbol.

1 Properties
- 1.1 Chemical resistance
2 Applications
3 See also

[edit] Properties

LDPE is defined by a density range of 0.910 - 0.940 g/cm³. It is unreactive at room temperatures, except by strong oxidizing agents, and some solvents cause swelling. It can withstand temperatures of 80 °C continuously and 95 °C for a short time. Made in translucent or opaque variations, it is quite flexible, and tough to the degree of being almost unbreakable.

LDPE has more branching (on about 2% of the carbon atoms) than HDPE, so its intermolecular forces (instantaneous-dipole induced-dipole attraction) are weaker, its tensile strength is lower, and its resilience is higher. Also, since its molecules are less tightly packed and less crystalline because of the side branches, its density is lower. LDPE contains the chemical elements carbon and hydrogen.

[edit] Chemical resistance

Excellent resistance (no attack) to dilute and concentrated acids, alcohols, bases and esters
Good resistance (minor attack) to aldehydes, ketones and vegetable oils
Limited resistance (moderate attack suitable for short-term use only) to aliphatic and aromatic hydrocarbons, mineral oils, and oxidizing agents
Poor resistance, and not recommended for use with Halogenated hydrocarbons.[2]

[edit] Applications

LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipment. Its most common use is in plastic bags. Other products made from it include:

Trays & general purpose containers
Food storage and laboratory containers
Corrosion-resistant work surfaces
Parts that need to be weldable and machinable
Parts that require flexibility, for which it serves very well
Very soft and pliable parts
Six-pack soda can rings
Extrusion coating on paperboard and aluminum laminated for beverage cartons.
Computer components, such as hard drives, screen cards and disk-drives.
Playground Slides

[edit] See also

This article about polymer science is a stub. You can help Wikipedia by expanding it.

[[tr:LDPE

Featured MP3 :